PH232T485Y12

Serial RS232 to #2 RS485/RS422 Industrial Isolated HUB


Introduction

IP Electronix PH232T485Y12 is a Bi-Directional Serial RS232 to 4 RS485/RS422 HUB that provides #2 RS485/RS422 ports from one single RS232 port that converts RxD & TxD signals of RS232 standard to differential (Data+ & Data-) signals of RS485 standard and (RX+, RX- & TX+, TX-) signals of RS422 standard at a same time. It works with Baud-Rate from 300bps to 230400bps. Using this device, you can connect a RS232 line, to 2 different devices which have RS485 or RS422 ports.

Since RS485 is a Half-Duplex standard, switching between Transmit and Receive is done automatically and further signals (such as RTS) are not required. PH232T485Y12 supports Point-to-Point and Point-to-Multi Point Party Line network topologies.

There are 3kV Optical and Electrical insulations have between RS232 and RS485/RS422 sides, thus using this device in the RS485/RS422 line, can be very effective in eliminating electrically and electromagnetically noises.

Protection against Surge, ESD and EMI is considered in its design, so, PH232T485Y12 is good for industrial usage and is useful for Industrial Automation, Telecommunications, SCADA Systems, DCS Systems and …

Contact us to buy and know the price of Industrial Serial RS232 to RS485, PH232T485Y12 converter.


Specifications


  • #1 Serial RS232 to #2 RS485/RS422 Bi-Directional Isolated HUB;
  • Number of Ports: #1 RS232 to #2 RS485/RS422 Bi-Directional Repeater;
  • Serial Standard: Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards;
  • RS232 Signal (Full Flow Control Support): TxD, RxD, DTR, RTS, DSR, CTS, GND;
  • RS232 Parity: Even, Odd, None, Mark and Space;
  • Standard TTL TxD and RxD Signals, suitable for directly connect to a Microcontroller
  • Serial Standard: Meets or Exceeds the Requirements of RS485/422 Standards;
  • RS485 Signal: Data+, Data-, GND;
  • RS422 Signal: TX+, TX-, RX+, RX-, GND;
  • RS485/422 Parity: Even, Odd, None, Mark and Space;
  • Maximum Communication Distance: 2400m (1200m each side);
  • Loading: RS485 and RS422 Side up to 32 Nodes are supported;
  • Fully Plug & Play;
  • Wide Range Power Supply: +8V to +48V DC;
  • Serial Transmission Speed up to 230.4 kbps;
  • Power (Green) LED Indicator;
  • Transmit (Blue) and Receive (Yellow) LED Indicator;
  • Isolation Protection: 3kV Instantaneous, 500V DC Continuous;
  • Surge Protection: Embedded 1500W Surge Protection;
  • Magnetic Isolation:5 kV Built-in;
  • ESD Protection: Exceeds ±15 kV Using Human-Body Model (HBM);
  • Dimensions: 145mm x 118mm x 27mm (5.70in x 4.65in x 1.06in);
  • Operating Temperature: -10°C to +70°C (+14°F to +158°F);
  • 1 Year Guarantee and 5 Years Support.


User's Manual Data Sheet