Isolated & Repeater Serial RS232 RS485 RS422
The Y series of industrial interfaces manufactured by IP Electronix are Repeater, Amplifier and Isolator for data transmission in RS232, RS485, RS422 standards.
This series supports 300bps to 230400bps Baud-Rate, and by adding them to the RS-232, RS-485 and RS-422 communication paths, they can be very effective in removing noise and amplifying the signal. Also, in Y12 and Y14 models, a serial line can be divided into two or four separate isolated branches.
With the Y Series products, the length of the RS-232 lines can be increased to at least 30m, and for the RS485 and RS422 can be increased up to 2400m, and more devices can be connected to one RS-485 line.
These converters work with a wide range of power supply from + 8V to + 48V and for all models and also, there is a 12V adapter with each of them.
3kV optical and electrical insulation for each port, as well as protection against lightning, electric and electromagnetic shocks, as well as the removal of electromagnetic noise, are provided in the design of these converters. These specifications make the E Series the choice for use in industrial automation, telecommunication systems, SCADA systems, DCS systems and the like.
Contact us to buy and know the price of Isolated & Repeater Serial.
PH232Y11
Serial RS232/TTL USART Repeater & Isolator
Introduction
IP Electronix PH232Y11 is a Bi-Directional Serial RS232/TTL UART Repeater and Isolator and Amplifier. It works with Baud-Rate from 300bps to 230400bps. This device adds up to 3kV optical and electrical insulation between the two RS232 sides, which eliminates noise from the RS232 path. Also, if a length of more than 15m is required for the RS232 line, by adding one PH232Y11, the length of the RS232 cable can be increased up to at least 30m, i.e., 15m meters on each side. Also, due to having the TTL ports, PH232Y11 can be connected directly to a microcontroller system.
Protection against Surge, ESD and EMI is considered in its design and also there is 3kV Electrical and Optical insulation between RS232/TTL UART sides.
PH232Y11 is designed for industrial usage and is useful for Industrial Automation, Telecommunications, SCADA Systems, DCS Systems and …
Contact us to buy and know the price of Serial Repeater and Isolator PH232Y11 converter.
Specifications
- Serial RS232 Repeater, Isolator and Amplifier;
- Number of Ports: #1 RS232/TTL UART to #1 RS232 Bi-Directional Repeater;
- Serial Standard: Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards;
- RS232 Signal (Full Flow Control Support): TxD, RxD, DTR, RTS, DSR, DCD, CTS, RI, GND;
- RS232 Parity: Even, Odd, None, Mark and Space;
- Fully Plug & Play;
- Wide Range Power Supply: +8V to +48V DC;
- Serial Transmission Speed up to 230.4 kbps;
- Power (Green) LED Indicator;
- Transmit (Blue) and Receive (Yellow) LED Indicator;
- Isolation Protection: 3kV Instantaneous, 500V DC Continuous;
- Surge Protection: Embedded 1500W Surge Protection;
- Magnetic Isolation:5 kV Built-in;
- ESD Protection: RS232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM);
- Dimensions: 26mm x 71.6mm x 122 mm (1.03in x 2.8in x 4.82in);
- Operating Temperature: -10°C to +70°C (+14°F to +158°F);
- 1 Year Guarantee and 5 Years Support.
User's Manual Data Sheet
PH232Y12
#1 to #2 Serial RS232 Isolated HUB (Repeater & Isolator)
Introduction
IP Electronix PH232Y12 is a 1 to 2 Serial RS232 Repeater and Isolator HUB that provides #2 RS232 (Full Duplex) ports from one single RS232 port. It works with Baud-Rate from 300bps to 230400bps. Using this device, you can connect a RS232 line, to 2 different devices.
PH232Y12 can also be used as a RS232 Repeater, Amplifier and Y-Switch. All communications are Full-Duplex. In addition, 3kV Optical and Electrical insulations have been used in the design of this device, this means all the ports are insulated from each other, so using this device in the RS-232 line, can be very effective in eliminating electrically and electromagnetically noises. Also, the length of the RS-232 line increases from 15m to 30m (15m on each side).
Protection against Surge, ESD and EMI is considered in its design, so, PH232Y12 is good for industrial usage and are useful for Industrial Automation, Telecommunications, SCADA systems, DCS systems...
Contact us to buy and know the price of Serial Repeater and Isolator PH232Y12 converter.
Specifications
- RS232 Repeater, HUB, Isolator and Amplifier;
- Number of Ports: #1 RS232 to #2 RS232 Bi-Directional HUB;
- Serial Standard: Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards;
- RS232 Signal: TxD, RxD, GND;
- RS232 Parity: Even, Odd, None, Mark and Space;
- Fully Plug & Play;
- Wide Range Power Supply: +8V to +48V DC;
- Serial Transmission Speed up to 230.4 kbps;
- Power (Green) LED Indicator;
- Transmit (Blue) and Receive (Yellow) LED Indicator;
- Isolation Protection: 3kV Instantaneous, 500V DC Continuous;
- Surge Protection: Embedded 1500W Surge Protection;
- Magnetic Isolation:5 kV Built-in;
- ESD Protection: RS232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM);
- Dimensions: 145mm x 118mm x 27mm (5.70in x 4.65in x 1.06in);
- Operating Temperature: -10°C to +70°C (+14°F to +158°F);
- 1 Year Guarantee and 5 Years Support.
User's Manual Data Sheet
PH232Y14
Industrial Serial #1 to #4 RS232 HUB (Repeater & Isolator)
Introduction
IP Electronix PH232Y14 is a 1 to 4 Serial RS232 Repeater and Isolator HUB that provides #4 RS232 (Full Duplex) ports from one single RS232 port. It works with Baud-Rate from 300bps to 230400bps. Using this device, you can connect a RS232 line, to 4 different devices.
PH232Y14 can also be used as a RS232 Repeater, Amplifier and Y-Switch. All communications are Full-Duplex. In addition, 3kV Optical and Electrical insulations have been used in the design of this device, this means all the ports are insulated from each other, so using this device in the RS232 line, can be very effective in eliminating electrically and electromagnetically noises. Also, the length of the RS232 line increases from 15m to 30m (15m on each side).
Protection against Surge, ESD and EMI is considered in its design, so, PH232Y14 is good for industrial usage and are useful for Industrial Automation, Telecommunications, SCADA systems, DCS systems...
Contact us to buy and know the price of Industrial Serial Repeater and Isolator PH232Y14 converter.
Specifications
- Serial RS232 Repeater, HUB, Isolator and Amplifier;
- Number of Ports: #1 RS232 to #4 RS232 Bi-Directional HUB;
- Serial Standard: Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards;
- RS232 Signal: TxD, RxD, GND;
- RS232 Parity: Even, Odd, None, Mark and Space;
- Fully Plug & Play;
- Wide Range Power Supply: +8V to +48V DC;
- Serial Transmission Speed up to 230.4 kbps;
- Power (Green) LED Indicator;
- Transmit (Blue) and Receive (Yellow) LED Indicator;
- Isolation Protection: 3kV Instantaneous, 500V DC Continuous;
- Surge Protection: Embedded 1500W Surge Protection;
- Magnetic Isolation:5 kV Built-in;
- ESD Protection: RS232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM);
- Dimensions: 218mm x 122mm x 30mm (8.58in x 4.80in x 1.18 in);
- Operating Temperature: -10°C to +70°C (+14°F to +158°F);
- 1 Year Guarantee and 5 Years Support.
User's Manual Data Sheet
PH232T485Y11
Serial RS232/TTL USART to RS485/RS422 Isolated Converter
Introduction
IP Electronix PH232T485Y11 is a Bi-Directional Serial RS232/TTL UART to RS485 and RS422 Converter that converts RxD & TxD signals of RS232 standard to differential (Data+ & Data-) signals of RS485 standard and (RX+, RX- & TX+, TX-) signals of RS422 standard at a same time. It works with Baud-Rate from 300bps to 230400bps
Since RS485 is a Half-Duplex standard, switching between Transmit and Receive is done automatically and further signals (such as RTS) are not required. PH232T485Y11 supports Point-to-Point and Point-to-Multi Point Party Line network topologies.
There are 3kV Optical and Electrical insulations have between RS232/TTL UART and RS485/RS422 sides, thus using this device in the RS485/RS422 line, can be very effective in eliminating electrically and electromagnetically noises.
Protection against Surge, ESD and EMI is considered in its design, so, PH232T485Y11 is good for industrial usage and is useful for Industrial Automation, Telecommunications, SCADA Systems, DCS Systems and …
Contact us to buy and know the price of Industrial Serial RS232 to RS485, PH232T485Y11 converter.
Specifications
- RS232/TTL UART to RS485/422 Bi-Directional Isolated Converter;
- Number of Ports: #1 RS232 to #1 RS485/422 Bi-Directional Repeater;
- Serial Standard: Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards;
- RS232 Signal (Full Flow Control Support): TxD, RxD, DTR, RTS, DSR, CTS, GND;
- RS232 Parity: Even, Odd, None, Mark and Space;
- Standard TTL TxD and RxD Signals, suitable for directly connect to a Microcontroller
- Serial Standard: Meets or Exceeds the Requirements of RS485/422 Standards;
- RS485 Signal: Data+, Data-, GND;
- RS422 Signal: TX+, TX-, RX+, RX-, GND;
- RS485/422 Parity: Even, Odd, None, Mark and Space;
- Maximum Communication Distance: 2400m (1200m each side);
- Loading: RS485 and RS422 Side up to 32 Nodes are supported;
- Fully Plug & Play;
- Wide Range Power Supply: +8V to +48V DC;
- Serial Transmission Speed up to 230.4 kbps;
- Power (Green) LED Indicator;
- Transmit (Blue) and Receive (Yellow) LED Indicator;
- Isolation Protection: 3kV Instantaneous, 500V DC Continuous;
- Surge Protection: Embedded 1500W Surge Protection;
- Magnetic Isolation:5 kV Built-in;
- ESD Protection: Exceeds ±15 kV Using Human-Body Model (HBM);
- Dimensions: 26mm x 71.6mm x 122 mm (1.03in x 2.8in x 4.82in);
- Operating Temperature: -10°C to +70°C (+14°F to +158°F);
- 1 Year Guarantee and 5 Years Support.